Opus BluePrint Software Disclaimer Statement

By accessing and using Opus BluePrint Software, these terms and conditions automatically apply to you. Please read them carefully before use. By using Opus BluePrint Software, you agree to be bound by these Terms and Conditions. If you have a Signed Licence Agreement with Opus Hardware and the terms of that agreement conflict with any part of these terms and conditions, the Signed Licence Agreement takes precedence.

About Opus Hardware and Opus BluePrint Software

Opus Hardware Limited is a hardware supply company operating within the glass and glazing industry. Opus BluePrint Software is a web-based software tool developed and owned by Opus Hardware, designed to assist users with glass calculations and associated measurements. It is offered as a supplementary tool to support — but not replace — the professional judgement, expertise, and on-site verification of the user. Opus BluePrint Software is not a substitute for professional engineering advice.

Indicative Calculations – Important Notice

All calculations, measurements, and outputs generated by Opus BluePrint Software are indicative only. They are provided as an accurate guide to assist with planning and estimation purposes and must not be solely relied upon as final or definitive figures. All calculations must be independently verified on-site by a suitably qualified person before placing any orders, commencing manufacturing, or undertaking any work. Opus Hardware accepts no responsibility for any loss, cost, or damage arising from the use of unverified calculations generated by the software.

PS1 Information & Council Compliance

Whilst Opus BluePrint Software is linked with PS1 limitations and product performance data to assist with the design process, Opus Hardware accepts no responsibility for ensuring that any design generated by the software is fully compliant with current building consent or council requirements. It is the sole responsibility of the installer to refer to the most current and available PS1 document for the relevant system or systems being installed, which outlines what is required and acceptable for each specific installation. The installer must cross-reference all designs generated by Opus BluePrint Software against the applicable PS1 documentation and satisfy themselves that the proposed installation is suitable, compliant, and meets all relevant standards before proceeding with any work.

Intellectual Property

You are not permitted to copy, modify, or reproduce the software or any part of it, including our trademarks, in any way. You must not attempt to extract the source code, translate the software into other languages, or create derivative versions of it. The software, along with all associated trademarks, copyright, database rights, and other intellectual property rights, remains the sole property of Opus Hardware.

The user acknowledges that all Intellectual Property Rights in Opus BluePrint Software are and remain the sole property of Opus Hardware. By agreeing to these terms, you confirm that you will not, during or after the expiry or termination of this agreement, question, challenge, or dispute Opus Hardware's ownership of any such rights, nor assist any third party in doing so. You also agree not to take any action that may adversely affect those rights.

Furthermore, any enhancements or improvements to Opus BluePrint Software that arise from suggestions made by the user remain the sole intellectual property of Opus Hardware.

If you become aware of any infringement of these terms and conditions, you agree to notify Opus Hardware immediately, providing all relevant information in your possession.

Limitation of Liability

Opus Hardware accepts no liability for any loss or damage, direct or indirect, arising from your use of Opus BluePrint Software. This includes, but is not limited to, any loss or damage caused by an act, omission, error, fault, or delay on the part of Opus Hardware or its employees or agents; the provision, maintenance, use, or termination of Opus BluePrint Software; any bug or failure within the software; or the interception of any communication made while using the software.

Opus Hardware expressly excludes liability for any indirect or consequential loss or damage arising from the use of Opus BluePrint Software, including but not limited to loss of profit, business, revenue, goodwill, or anticipated savings, whether direct or indirect.

Each limitation or exclusion contained in these terms and conditions is to be interpreted as a separate provision and remains effective even if any other provision is found to be inapplicable in any circumstance.

User Responsibilities

Users of Opus BluePrint Software acknowledge that the software is a tool designed to assist with glass calculations and associated measurements. The user accepts full responsibility for independently verifying all information entered into and generated by the software, ensuring it is accurate, appropriate for its intended use, and compliant with all relevant regulations and standards.

The accuracy of all information produced by the software depends entirely on the accuracy of the data entered by the user. Opus Hardware accepts no responsibility for errors arising from inaccurate data entry or failure to verify outputs, or outputs generated incorrectly due to bugs or issues within the software. It is essential that all calculations and designs are carefully reviewed, verified on-site, and approved before use or ordering.

Opus BluePrint Software has been developed by a team of industry specialists with extensive experience in the glass and glazing sector. However, every job is different and businesses operate in their own unique ways. It is the user's sole responsibility to ensure that all information generated by the software is accurate, appropriate, and approved for their specific requirements. Before manufacturing any material based on information produced by the software, the user must independently verify that it meets the full specifications of their particular job.

Data and Security

Opus BluePrint Software stores and processes personal data provided by the user in order to deliver its services. It is your responsibility to keep your login credentials and access to the software secure. We strongly recommend that you do not share your account details with others, and that you notify Opus Hardware immediately if you suspect any unauthorised access to your account.

Connectivity

Opus BluePrint Software is a web-based tool and requires an active internet connection to function. Opus Hardware cannot be held responsible for reduced functionality or unavailability resulting from a lack of internet access on the user's end. It is the user's responsibility to ensure they have a stable and reliable internet connection when using the software.

Standard data charges from your internet or mobile provider may apply when accessing Opus BluePrint Software. By using the software, you accept responsibility for any such charges. If you are not the account holder for the connection being used, we assume that you have obtained permission from the account holder to use the software.

Third-Party Information

While Opus Hardware endeavours to ensure the software remains accurate and up to date at all times, certain information within Opus BluePrint Software may be sourced from third parties. Opus Hardware accepts no liability for any loss, direct or indirect, resulting from reliance on third-party information provided through the software.

Updates and Changes

As a web-based tool, Opus BluePrint Software is updated and maintained by Opus Hardware without any action required by the user. Updates may include new features, bug fixes, performance improvements, and changes required for regulatory compliance. Opus Hardware reserves the right to make changes to the software at any time.

Opus Hardware does not guarantee that Opus BluePrint Software will remain available indefinitely and reserves the right to introduce charges for its services or discontinue the software entirely at any time and without notice. Upon termination of access: (a) all rights and licences granted to you under these terms will cease; and (b) you must immediately stop using the software.

Any changes made to these terms and conditions take effect immediately upon posting.

Changes to These Terms and Conditions

We may update these Terms and Conditions from time to time. We encourage you to review this page periodically. Any changes will be posted on this page and take effect immediately upon publication.

Last updated: 27 March 2026

Contact Us

If you have any questions or suggestions regarding these Terms and Conditions, please contact us at: sales@opushardware.co.nz